Faxing: Quick Installation Guide for the Hybrid Fax ATA

This article is a step by step guide on how to deploy the Hybrid Fax ATA device.


  1. Using an Ethernet cable, connect the Internet port on the back of the Hybrid Fax ATA to your network port on the wall. If there is a connection, the LED on the device should be solid blue. 
  2. Connect one end of a phone cord to the Phone Port on the Hybrid Fax ATA and the other end on the line port on the fax machine.
  3. Do not use the Ethernet port on the device.
  4. Plug the Hybrid Fax ATA into an electrical outlet or power strip.

  5. After the hardware connections have been completed, check the status of the LED indicators using the following table.